# Functional Classification

**URL:** <https://www.waze.com/discuss/t/functional-classification/94283>\
**Category:** United States\
**Created:** [August 14, 2012, 5:08pm UTC](https://www.waze.com/discuss/t/functional-classification/94283 "2012-08-14T17:08:37Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![CBenson](https://www.waze.com/discuss/letter_avatar_proxy/v4/letter/c/FD804B/32.png) [@CBenson](https://www.waze.com/discuss/u/CBenson)\
**Post date:** [August 14, 2012, 5:08pm UTC](https://www.waze.com/discuss/t/functional-classification/94283/1 "2012-08-14T17:08:37Z")

</div>

I been watching the discussion in the NY subforum on road classification and matching the road types to the functional class, where the following corrolation was proposed.

> [@AndyPoms](#):
>
> > [@jeberhard](#):
> >
> > Interstate = Freeway  
> > Principal Arterial (Expwy) = Major Hwy  
> > Principal Arterial (Other) = Minor Hwy  
> > Minior Arterial = Primary  
> > Collector & Loal = Streets
> 
> This is the translation matrix I’ve been using in CT… Works pretty well based on routing before and after making the changes…
> 
> The only gray area I’ve run into is for the Minor Arterial Roads… In some places it makes sense to be a “Primary”, in others it makes sense to be a “Minor Highway”… I want to get more of CT done before I make a decision there (and talk to some Senior Editors)…
> 
> I highly suggest to label Collectors as “Primary Streets”, as their functional purpose is for cars to go from local streets to them, then on to higher & higher level roads…

I’m wondering how to correlate to the classes I see from the Maryland State Highway Adminstration, which seem to be:

Interstate  
Frwy Expwy  
OPA  
Minor Art  
Major Coll  
Coll  
Minor Coll  
Local

I guess I’m wondering what is marked as Principal Arterial (Expwy) and whether that would match with Frwy Expwy here. Here the Frwy Expwy roads are limited access and are currently typed as freeways. Examples are [MD-100](https://www.waze.com/editor/?zoom=2&lat=39.15127&lon=-76.68395&layers=BFTFTTTTTTFTTTTTTTTTFT) and [MD-32](https://www.waze.com/editor/?zoom=2&lat=39.09434&lon=-76.70592&layers=BFTFTTTTTTFTTTTTTTTTFT). Are these the types of roads that others find marked Principal Arterial (Expwy) and mark as major highways? Are there any freeways that are not Interstates when you mark Principal Arterial (Expwy) as major highways?

---

<div class="post-metadata">

**Author:** ![AndyPoms](https://www.waze.com/discuss/letter_avatar_proxy/v4/letter/a/FF5252/32.png) [@AndyPoms](https://www.waze.com/discuss/u/AndyPoms)\
**Post date:** [August 14, 2012, 5:36pm UTC](https://www.waze.com/discuss/t/functional-classification/94283/2 "2012-08-14T17:36:47Z")

</div>

While a road in given it’s Functional Classification by the states, they have to set those types based on Federal Functional Classification Definitions from the US DOT…

Each state must define roads into one of the following categories:

URBAN  
Principal Arterial - Interstate  
Principal Arterial - Other Expressway  
Principal Arterial - Other  
Minor Arterial  
Collector  
Local

RURAL  
Principal Arterial - Interstate  
Principal Arterial - Other Expressway  
Principal Arterial - Other  
Minor Arterial  
Major Collector  
Minor Collector  
Local

> [@](#):
>
> One of the difficulties surrounding the relationship between highway functional classification and design guidelines is that the classification process is not an exact science. The predominant traffic service associated with a particular route cannot be definitely determined without exhaustive surveys of traffic origindestination patterns on each link of the road network. Engineering judgment based on experience must play a role in making design decisions.
> 
> As a result of variances within the highway functional classification system, design guidelines established either in the Green Book or in other State and local government design manuals have overlapping ranges of values. This allows the designer greater flexibility in choosing a road design that is most appropriate within the determined functional classification
> 
> [http://www.fhwa.dot.gov/environment/publications/flexibility/ch03.cfm](http://www.fhwa.dot.gov/environment/publications/flexibility/ch03.cfm) - See subheadline “The Functional Classification Process Is Not an Exact Science”

The US DOT definitions intentionally overlap to provide flexibility, so do the Waze Road Type Definitions…

Starting simply, a limited access road in Waze is defined to fall into either “Freeway” or “Major Highway”, match that up with the US DOT Definitions and you get “Primary Arterial - Interstate” and “Primary Arterial - Other Expressway”. Two Waze types, two Functional Classifications, pretty easy match.

As for Maryland:  
MD = US DOT = Waze  
Interstate = Primary Arterial - Interstate = Freeway  
Frwy Expwy = Primary Arterial - Other Expressway = Major Highway  
OPA = Principal Arterial - Other = Minor Highway  
Minor Art = Minor Arterial = This is the gray area I mentioned in my earlier post, right now I’m tracing them back to Urban areas & matching that type.  
Major Coll = Major Collector (Rural) = Primary  
Coll = Collector (Urban) = Primary  
Minor Coll = Minor Collector (Rural) = Primary  
Local = Local = Street

This is the current version (version 2) of the translation matrix I’m using in CT: [http://www.waze.com/wiki/index.php/Image:ConnDOT\_FunctionalClassification-to-RoadType.jpg](http://www.waze.com/wiki/index.php/Image:ConnDOT_FunctionalClassification-to-RoadType.jpg)

---

<div class="post-metadata">

**Author:** ![bgodette1](https://www.waze.com/discuss/letter_avatar_proxy/v4/letter/b/963EFF/32.png) [@bgodette1](https://www.waze.com/discuss/u/bgodette1)\
**Post date:** [August 16, 2012, 12:43am UTC](https://www.waze.com/discuss/t/functional-classification/94283/3 "2012-08-16T00:43:59Z")

</div>

> [@AndyPoms](#):
>
> As for Maryland:  
> MD = US DOT = Waze  
> Interstate = Primary Arterial - Interstate = Freeway  
> Frwy Expwy = Primary Arterial - Other Expressway = Major Highway  
> OPA = Principal Arterial - Other = Minor Highway  
> Minor Art = Minor Arterial = This is the gray area I mentioned in my earlier post, right now I’m tracing them back to Urban areas & matching that type.  
> Major Coll = Major Collector (Rural) = Primary  
> Coll = Collector (Urban) = Primary  
> Minor Coll = Minor Collector (Rural) = Primary  
> Local = Local = Street
> 
> This is the current version (version 2) of the translation matrix I’m using in CT: [http://www.waze.com/wiki/index.php/Image:ConnDOT\_FunctionalClassification-to-RoadType.jpg](http://www.waze.com/wiki/index.php/Image:ConnDOT_FunctionalClassification-to-RoadType.jpg)

Wouldn’t a Rural Minor Collector be a Street? IME they tend to be 1+1s that feed into Major Collectors surrounding the blocks/super-blocks.

---

<div class="post-metadata">

**Author:** ![AndyPoms](https://www.waze.com/discuss/letter_avatar_proxy/v4/letter/a/FF5252/32.png) [@AndyPoms](https://www.waze.com/discuss/u/AndyPoms)\
**Post date:** [August 16, 2012, 12:53am UTC](https://www.waze.com/discuss/t/functional-classification/94283/4 "2012-08-16T00:53:27Z")

</div>

> [@bgodette](#):
>
> Wouldn’t a Rural Minor Collector be a Street? IME they tend to be 1+1s that feed into Major Collectors surrounding the blocks/super-blocks.

I considered that, but decided against it for a few reasons…

1. In CT they are few and far between
2. Most of the ones that do exist, start in an urbanized area as a regular Collector, cross into a rural area & change designation to a Minor Collector. This would leave a road that seemingly randomly changes type.
3. It’s still a collector, something that local streets feed to & would have higher traffic priority over local cross streets (i.e. timed traffic lights, fewer stop signs, etc)

---

<div class="post-metadata">

**Author:** ![bgodette1](https://www.waze.com/discuss/letter_avatar_proxy/v4/letter/b/963EFF/32.png) [@bgodette1](https://www.waze.com/discuss/u/bgodette1)\
**Post date:** [August 16, 2012, 1:27am UTC](https://www.waze.com/discuss/t/functional-classification/94283/5 "2012-08-16T01:27:54Z")

</div>

> [@AndyPoms](#):
>
> > [@bgodette](#):
> >
> > Wouldn’t a Rural Minor Collector be a Street? IME they tend to be 1+1s that feed into Major Collectors surrounding the blocks/super-blocks.
> 
> I considered that, but decided against it for a few reasons…
> 
> 1. In CT they are few and far between
> 2. Most of the ones that do exist, start in an urbanized area as a regular Collector, cross into a rural area & change designation to a Minor Collector. This would leave a road that seemingly randomly changes type.
> 3. It’s still a collector, something that local streets feed to & would have higher traffic priority over local cross streets (i.e. timed traffic lights, fewer stop signs, etc)

Fair enough.

---

<div class="post-metadata">

**Author:** ![CBenson](https://www.waze.com/discuss/letter_avatar_proxy/v4/letter/c/FD804B/32.png) [@CBenson](https://www.waze.com/discuss/u/CBenson)\
**Post date:** [August 16, 2012, 9:59pm UTC](https://www.waze.com/discuss/t/functional-classification/94283/6 "2012-08-16T21:59:22Z")

</div>

> [@AndyPoms](#):
>
> Starting simply, a limited access road in Waze is defined to fall into either “Freeway” or “Major Highway”, match that up with the US DOT Definitions and you get “Primary Arterial - Interstate” and “Primary Arterial - Other Expressway”. Two Waze types, two Functional Classifications, pretty easy match.
> 
> As for Maryland:  
> MD = US DOT = Waze  
> Interstate = Primary Arterial - Interstate = Freeway  
> Frwy Expwy = Primary Arterial - Other Expressway = Major Highway  
> OPA = Principal Arterial - Other = Minor Highway  
> Minor Art = Minor Arterial = This is the gray area I mentioned in my earlier post, right now I’m tracing them back to Urban areas & matching that type.  
> Major Coll = Major Collector (Rural) = Primary  
> Coll = Collector (Urban) = Primary  
> Minor Coll = Minor Collector (Rural) = Primary  
> Local = Local = Street

I’m in favor of using the functional classifications as a significant factor in road type decisions and have been giving much thought to your matches. I however cannot bring myself to adopt it. The most basic issue is that is not what has been done here. Non-interstate limited access highways have been typed as freeways here. Although, the wiki now states that that major highways “Can have stoplights or freeway style interchanges.” I hadn’t taken that to mean we should be typing roads that exclusively use freeway style interchanges as either freeways or major highways, but rather that roads with both are likely major highways. As most Frwy Expwy roads here fully meet the Freeway definition that is what they have been typed. In the few instances where I have seen parts of limited access highways classed as major highways around here, someone has always changed them to freeway (sometimes by waze staff like [here](https://www.waze.com/editor/?zoom=5&lat=38.91778&lon=-76.96137&layers=BFTFTTTTTTTTTTTTTTTTFT&segments=61219269,9293655)). I also have been basically applying the rule that if I am in doubt between two types use the higher type. My reasoning being that its better for roads to be included in the routing decisions than not.

If I was starting from scratch, I would really like to use your correlations because they are straightforward. As it is we have no good match for Major Highway. But I can’t see myself changing the non-interstate freeways to major highways around here at this point.

---

<div class="post-metadata">

**Author:** ![jeberhard](https://www.waze.com/discuss/letter_avatar_proxy/v4/letter/j/0099FF/32.png) [@jeberhard](https://www.waze.com/discuss/u/jeberhard)\
**Post date:** [August 20, 2012, 10:37pm UTC](https://www.waze.com/discuss/t/functional-classification/94283/7 "2012-08-20T22:37:16Z")

</div>

I’ve been using the above with success in the upper part of my county so far, but I haven’t touched anything classified as a “Freeway” (yet). Just getting the minor hwy and primary streets is a big deal and will hopefully help routing. Based on the DOT classes I did change a couple of small stretches of road from major to minor though as they were in between sections of minor highways and just got divided, but with excessive stop lights and only appearing for a few miles those stretches were hardly a major highway.

---

<div class="post-metadata">

**Author:** ![cdombroski](https://www.waze.com/discuss/letter_avatar_proxy/v4/letter/c/FFC400/32.png) [@cdombroski](https://www.waze.com/discuss/u/cdombroski)\
**Post date:** [August 27, 2012, 4:51pm UTC](https://www.waze.com/discuss/t/functional-classification/94283/8 "2012-08-27T16:51:27Z")

</div>

I’ve been adjusting roads according to the FHCS maps(1) for Richmond, VA; my mapping system was a little bit different though.

Interstate = Freeway  
Principal Arterial (Expwy) = Freeway  
Principal Arterial (Other) = Maj Hwy  
Minior Arterial = Minor Hwy  
Collector = Primary  
Local = Street

There’s only about 5 roads in the area marked as Principal Arterial (Expwy) type so I figured I should merge them into one of the other categories rather than use an entire category for a handful of roads. Since they are Interstate type roads (no at grade junctions, highest speed limits) I bumped them up to the freeway category.  
[Richmond, VA in Waze](https://www.waze.com/editor/?id=&countryID=235&stateID=51&emptyCity=on&streetName=%20&emptyStreet=on&zoom=0&lat=37.57035&lon=-77.49237&layers=BFTFTTTTTTTTTTTTTTTTFT&cameras=246403)  
It also compares favorably with how google classifies roads for what that’s worth.  
[Richmond, VA in GMaps](https://maps.google.com/?ll=37.539405,-77.443657&spn=0.282849,0.41851&t=m&z=12)

1: [Richmond FHCS Maps](http://www.virginiadot.org/projects/fxn_class/richmond.asp)

---

<div class="post-metadata">

**Author:** ![CBenson](https://www.waze.com/discuss/letter_avatar_proxy/v4/letter/c/FD804B/32.png) [@CBenson](https://www.waze.com/discuss/u/CBenson)\
**Post date:** [August 27, 2012, 5:03pm UTC](https://www.waze.com/discuss/t/functional-classification/94283/9 "2012-08-27T17:03:11Z")

</div>

> [@cdombroski](#):
>
> I’ve been adjusting roads according to the FHCS maps(1) for Richmond, VA; my mapping system was a little bit different though.
> 
> Interstate = Freeway  
> Principal Arterial (Expwy) = Freeway  
> Principal Arterial (Other) = Maj Hwy  
> Minior Arterial = Minor Hwy  
> Collector = Primary  
> Local = Street

This is what I want to do, but there are too many two-lane highways around here classed as OPA (Other Principal Arterial), that really don’t meet any of the expectations for a major highway.
