1. Include the city and state in the "Subject:" line of your post
2. Include a Permalink to the segment(s) you wish to unlock or have updated
3. Provide a short explanation of why you need the unlock or update done.
4. Thank the user who solved the request and mark the thread Solved.

Please note that a higher level editor may choose to fix an unlock request themselves so higher value segments will remain protected at their level.

Post Reply
Forum rules
1. Include the city and FULL state name in the "Subject:" line of your post
2. Include a Permalink to the segment(s) you wish to unlock or have updated
3. Provide a short explanation of why you need the unlock or update done.
4. When completed, THANK the user who solved the request and mark the thread SOLVED.

Level3 Update: Ohio - London

Post by ADriver_
My Level: 1
See: WME US-40W to US-42S

The ramp segment is meant for US-40W to US-42S (the left turn onto US-42N should be restricted). This ramp is also the exit ramp from US-42S to US-40W only. The traffic patterns should be as follows:

* US-40W to US-42N should use segment "Old US-42"

* US-40W to US-42S should use the ramp segment, with an additional one-way segment that curves slightly towards US-42S at the end (see My UR with GPS turned on).

* US-40E to US-42S should use segments for "Old US 42"

* US-40E to US-42N should use these ramp segments with an additional segment one-way segment that curves towards US-42N.

--------

* US-42N to US-40E and W should use these ramp segments.

* US-42S to US-40W should use the ramp segment, with an additional one-way segment that curves towards US-40W.

* US-42S to US-40E should use segment "Old US-42"

These images may help. Click on them to open the full image. The forum may cut them off...
http://i.imgur.com/zR04wnL.jpghttp://i.imgur.com/VvPNtkf.jpg

Thanks, and happy Wazing!
ADriver_ | Tyler
ADriver_
Posts: 1

POSTER_ID:16961370

1

Send a message

Post by AlanOfTheBerg
ADriver_ wrote:The ramp segment is meant for US-40W to US-42S (the left turn onto US-42N should be restricted). This ramp is also the exit ramp from US-42S to US-40W only. The traffic patterns should be as follows
It looks like another editor has come through and made turn restriction changes to force the patterns as you described. Is this issue resolved?

I also changed Old 42 to a PS type to encourage routing that way.
AlanOfTheBerg
EmeritusChamps
EmeritusChamps
Posts: 23627
Has thanked: 568 times
Been thanked: 3479 times
Send a message
Wiki Resources: Map Editing Manual | alanoftheberg@gmail.com
Oregon-based US Ex-Global Champ Editor | iPhone13Pro - VZ