Page 27 of 42

Re: [Script] Highlights for Segments & Landmarks - v1.5 Nov

Posted: Sun Feb 10, 2013 2:33 pm
by rob7mgte
Great script Timbones! I've been using 1.5.8/9 since you released it and it is working fine.

Just noticed an interesting one - it highlighted a trail segment red even though 'Locks' highlighting was disabled and it wasn't locked. Took some trial and error to figure out what was going on. Turned out the segment didn't have any nodes at all. I fixed it and the highlighting went away. Is that red highlighting by design? Seems like it should have been highlighted lime instead.

Re: Re: [Script] Highlights for Segments & Landmarks - v1.5

Posted: Sun Feb 10, 2013 8:23 pm
by rob7mgte
Timbones wrote: Yes. Unnamed and paved roads are highlighted with bold red until they are named and connected. There's no option to disable it...
I know about the WME red highlighting you are referring to, but I think this is something different.

It was a named segment that had all of the correct characteristics. The two issues were it was completely disconnected from any other segments, and it didn't have a node at either end. I can recreate the red highlighting scenario by making a disconnected road. It doesn't matter if it is named or not.

It does not happen if your script is disabled. When your script is enabled, I also disabled all other scripts to make sure this isn't some kind of interaction or related to something else. It also happens if none of the options in your script are enabled. The highlighting goes away once the segment has a single node in it (which all connected segments would have). Could the 'no nodes' scenario this be an unhandled situation in your script causing strange behavior?

Re: Re: Re: [Script] Highlights for Segments & Landmarks - v

Posted: Sun Feb 10, 2013 9:24 pm
by rob7mgte
Timbones wrote: This is a deliberate (and undocumented) feature. If a segment has zero nodes, then it needs attending to, and either connecting or deleting.

If you really do need to keep an unconnected segment on the map, add nodes to each end. Generally, non-drivable roads don't need to be mapped.
Ok, got it. Well it is effective at drawing attention! :D

Re: Script to add Highlights for Segments & Landmarks - v1.3

Posted: Sun Sep 30, 2012 3:33 pm
by RodNav
GizmoGuy411 wrote:
iainhouse wrote:.....

The only reason I don't think it should be part of WME, is that we get better support & response time from you! ;)

Good point!
Agreed!

Re: [Script] Highlights for Segments & Landmarks - v1.4.2 Oc

Posted: Thu Nov 01, 2012 7:23 pm
by RodNav
AlanOfTheBerg wrote:
Kuhlkatz wrote:Maybe Tim should add another checkbox for
[ ] Reading Glasses?

;)
I wouldn't see that either! :x
:lol: :lol: :lol:

Re: [Script] Highlights for Segments & Landmarks - v1.5 Nov

Posted: Tue Dec 11, 2012 1:18 pm
by rottielover
I didn't see any video's on youtube about how to fix U-Turn and RevCon nodes (using the highlight script to find them).

I tried my hand at creating one : http://youtu.be/IFNXGQjA4kc

I had some trouble with the volume. Let me know what you think.

Re: [Script] Highlights for Segments & Landmarks - v1.5 Nov

Posted: Tue Dec 11, 2012 4:57 pm
by rottielover
BlazeTool wrote: Only criticism is that you should tell users to check existing turn restrictions before doing a QW or disconnect/reconnect. You mention double checking when you are finished, but they might not know what restrictions they need to put back in without checking existing restrictions before modifying.
I felt it was a bit redundant to keep saying "check, check, check". Plus I've found plenty of nodes that had incorrect turn restrictions already set (by fixing the revcon or uturn you end up fixing improper turn restrictions sometimes). Remember this video is targeted to more "advanced" map editor's (AM's and above).

However, I'll add some overlay text via YouTube to put a reminder in .

Re: [Script] Highlights for Segments & Landmarks - v1.5 Nov

Posted: Tue Dec 11, 2012 5:00 pm
by rottielover
fvwazing wrote: As for reconnecting segments: I made it a habit to move the node a bit, then deselect, then select it again and drag it back. Didn't know it can be done in one move ;-)

And please - configure your PC to show a extra-BIG mousecursor next time. And move it slower.
I've found you can usually do it all in one move, but I have run into some segments and nodes on a "case by case" basis that required "fiddling" with the editor to get them right. I had a loop road just a min ago that I ended up having to completely disconnect all segments, save, then reconnect to get this thing to save properly. Most of the time you can do it all in a few steps then save.

Good point on the mouse cursor, the speed is slightly increased due to the video encoding. I'll make it giant size next time ;)

Re: Script to add Highlights for Segments & Landmarks - v1.2

Posted: Fri Sep 07, 2012 6:07 pm
by rotus8
Thank you, thank you for this script. I don't know why I never read this thread before, but I installed the script and it is fantastic. I have been going back over some areas I thought were in good shape, and keep finding unterminated roads, unknown direction, and one-way cul-de-sacs I missed, and have been able to find some city xxx(2) I have been looking for. Excellent.

Re: Script to add Highlights for Segments & Landmarks - v1.2

Posted: Mon Sep 10, 2012 8:23 pm
by rotus8
How about highlighting unnecessary nodes: a node between only two segments, with the same street and city name.

Loving this script! Thanks.

Edit: Oops, just went back and read all posts in the thread and this suggestion has already been requested (and rejected).