Page 118 of 225

Re: [Script] UROverview Plus v3.11.1 (20140701)

Posted: Thu Jul 03, 2014 3:31 am
by SuperDave1426
Twister-UK wrote:
SuperDave1426 wrote:Ok, I'd like to modify my recommendation regarding the "disclaimer" to be that you should indicate that it only really works if you've got the AM layer turned on in the map editor display. :-)
It should work either way - if the AM layer is already turned on then it uses the AM area data already loaded by WME itself, otherwise it requests that data itself as you pan/zoom the map view. One niggly bit of behaviour I've noticed (and will try to address in a future release) is that this self-request mechanism doesn't work when you first open up a location via the search box, it's only once you then nudge the map view even by a single pixel that it's able to pull in the data itself.
Maybe that's the way that it's supposed to work, but that hasn't been the case for me so far. I move, then move the mouse, and nothing. It wasn't until I turned on the AM layer that it started showing information. And when I turned the layer back off, it stopped updating the information. Whatever was there at the time remains there. When I move off and on areas where the information had been changing with the AM layer turned on, nothing was happening with it turned off.

Re: [Script] UROverview Plus v3.11.1 (20140701)

Posted: Thu Jul 03, 2014 4:13 pm
by SuperDave1426
Twister-UK wrote:
SuperDave1426 wrote:Maybe that's the way that it's supposed to work, but that hasn't been the case for me so far. I move, then move the mouse, and nothing. It wasn't until I turned on the AM layer that it started showing information. And when I turned the layer back off, it stopped updating the information. Whatever was there at the time remains there. When I move off and on areas where the information had been changing with the AM layer turned on, nothing was happening with it turned off.
Let me get this clear, are you saying that if you turn off the AM layer and leave the map view exactly as it was - no panning or zooming - the AM list then stops changing when you move the mouse pointer across the same part of the screen where, when the AM layer was still shown, the list was changing? Or does it still change the list OK until you then pan/zoom the map with the AM layer turned off, at which point it then stops updating until you turn the layer back on?

Which browser, WME version (public/beta), and language and server location settings (as shown in the top-right corner of WME) are you using?
Yea, that was exactly what I was saying, except I just noticed something when I was starting to put together some screen shots to illustrate - it works if I'm not zoomed out to the absolutely last position. If I zoom in even one notch (on the zoom scale in the upper left), then moving the mouse around, without the AM layer turned on, it does in fact update the information. I typically scan around at maximum zoom out to look for URs & MPs, and then only zoom in when I need to work on something. So when I was checking out the new feature yesterday, I moved the mouse, and nothing happened.

I just double-checked now - at maximum zoom out, it only works if the AM layer is turned on. Turn it off, and the info stops updating. But even one zoom in and it's fine. Strange!

To answer your question, though, I'm running the current version of Chrome, English language, on the US & Canada server. I'm only on the public, non-beta WME editor.

Re: [Script] UROverview Plus v3.12 (20140703)

Posted: Thu Jul 03, 2014 11:30 pm
by SuperDave1426
Seems to be working now, thanks!

Re: [Script] UROverview Plus v3.12 (20140703)

Posted: Mon Jul 14, 2014 12:50 am
by SuperDave1426
I was wondering if there's a combination of options that can be used to hide an open UR where the last comment was made by me, but only if that last comment was made less than x days ago. Once it gets over a certain number of days, it shows up again.

So, is there a way to make it do that? :D

Re: [Script] UROverview Plus v3.12 (20140703)

Posted: Mon Jul 14, 2014 2:26 am
by SuperDave1426
Thanks for the info. Based on what I saw in the options, I didn't think it would be possible to filter the way I described. But I figured it couldn't hurt to ask. :-)

Re: [Script] UROverview Plus v3.17 (20140820)

Posted: Sun Aug 24, 2014 3:01 am
by SuperDave1426
Taco909 wrote:Saved as a point, but when you change it to area, it's the original unedited box.
So, drag the geometry nodes on the area to make it the shape you want and then save. :-)

Remember, gas stations are supposed to be saved as areas, not points.

https://wiki.waze.com/wiki/Places#When_ ... a_or_Point

Re: [Script] UROverview Plus v3.19 (20140831)

Posted: Wed Sep 17, 2014 8:33 pm
by SuperDave1426
I've never played the piano, and I've had no problem with hitting the enter key on the numeric keypad on my keyboard when I've needed to without my hand ever leaving the mouse, for years. It's not that hard.... :D

Re: [Script] UROverview Plus v3.33 (20141228)

Posted: Tue Dec 30, 2014 6:12 pm
by SuperDave1426
Ok, I guess first I'll add to the voices saying that there seems to be a problem with viewing a UR properly when clicking on it (doesn't want to load).

That done, now for why I came into this thread: I was wondering, is there any magical combination of options I can choose that will let me hide a UR that has been commented on within X days, unless there's been a new comment (last comment) by the reporter? I can't seem to come up with a combo that will do it. So when I get the E-Mail notification that a UR I've commented on has been replied to and I click on the link, the UR is still invisible until I go into URO+ settings and turn off the "hide comments less than x days" option.

I realize I could just do "last comment by me," but in the Raid area there area lots of people working URs and frankly, if another editor has already commented on a UR within the given time frame, I don't want to see it. :-)

Maybe an option could be added which says "UNLESS the last comment is the reporter" (which would then negate the other filter options and unhide the UR), or something like that? Or if there's already a way to achieve that with the current options available, I'd love to know what it is. ;)

Re: [Script] UROverview Plus v3.33 (20141228)

Posted: Tue Dec 30, 2014 8:10 pm
by SuperDave1426
taco909 wrote:
SuperDave1426 wrote:if another editor has already commented on a UR within the given time frame, I don't want to see it. :-)
Except that some of my comments are "Feel free to close, it's your area"
And eventually it will show up with the minimum age expires. So no, in my case, I really don't want to see it if it was commented on yesterday by another editor - I can just as easily close it four days from now as I can today (assuming that I've set 4 as the minimum number of days). :D If you've solved the issue and want it closed, then close it (which, IMO, you should be doing anyway if you've fixed a UR ("you" being a general term here, not necessarily you in particular) - just make your final comment and close it as solved/NI).

If I wasn't clear that I was still looking at a minimum age to go with the rest of my requirements, then I apologize for not being more clear in my intent.

Re: [Script] UROverview Plus v3.33 (20141228)

Posted: Tue Dec 30, 2014 8:39 pm
by SuperDave1426
taco909 wrote:
Thortok2000 wrote:
taco909 wrote: Except that some of my comments are "Feel free to close, it's your area"
Using current filters, I really hate comments like that {...}
http://i230.photobucket.com/albums/ee1/ ... hssign.gif
Even without filters, I hate comments like that. As far as I'm concerned, it became the other editor's issue the minute he/she stepped in and fixed it. Don't tell me I can close it now; you dealt with it, you can make your final comment and close it. :D
taco909 wrote:
Thortok2000 wrote:{...} since I won't see that UR again for 8 days unless I turn off my filter or navigate to it via the link in the e-mail.

If my requested filter setup becomes possible, though, it wouldn't be a problem at all. =D
Well... and the fact that my message will show in your email, giving you the heads up that you need to shut the filters off.
Yup. And when the E-Mail is because the reporter responded, I want to see the UR sooner than the number of days that I've set in the filter - which I believe was the point I was making when I asked if there was a way to add an option that negates the hide filters if the last comment is from the reporter. ;)

Yes, upon getting the E-Mail, I know that I now need to go through the hassle of bringing up the URO+ tab, scrolling down to find the filter options and shut off whichever ones have been set and then turn them all back on again once I'm done with this one particular UR, but that's kind-of a hassle. Such an option would alleviate that. It would be a nice convenience feature, that's all. If it can't be done or won't be done, then fine; it can't/won't be done. Personally, I really liked the filtering option setup that taco909 listed and would love to see that come to pass, but likewise; if it can't or won't be done, then there's not a lot we can do about it. But there's no harm in asking for a desired feature, right? :mrgreen:
Personally, I go in with all filters disabled and then apply them as the UR density dictates.
Yeah. And in the Raid area, if you don't turn those filters on and leave them on during your editing session, you end up with more URs than you can hope to deal with and keep track of in your head. ;)