Page 166 of 236

Re: [Script] WME Validator 1.0.2 / 04.07.2014

PostPosted: Mon Aug 04, 2014 1:32 pm
by quantumjedi
WaseYves wrote:I got that message

WME Validator v1.0.2 error:
This build of WME Validator has expired. Please upgrade!

Try to re-install from Chrome Web Store.
Don't work.

How do i fix that ?

Until the author updates it, you can use one of the workarounds mentioned above.

Re: [Script] WME Validator 0.7.2 (BETA) / 24.02.2014

PostPosted: Wed Feb 26, 2014 3:57 pm
by qwaletee
sketch wrote:
berestovskyy wrote:
dbraughlr wrote:When a USA street name starts with a compass indicator [ENSW], the next word should start with a capital letter.

We can go further and check if every word in the street name starts with a capital letter. But at the moment #94 is checking just the beginning of the street name.

No thank you. It took me about ten seconds to think of a valid example that would violate this. Similar examples, I'm sure, exist in many places.


You may be misreading this. It seems aimed at the "E main st" situation. A better wording of the rule logic would be "If street name begins with EWNS followed by a space followed by a lowercase letter." Yes, it is just a special case of checking first letter capitalization in general. I don't know how prevalent the problem is that we should spend CPU cycles on it.

Re: [Script] WME Validator 0.7.3 (BETA) / 24.02.2014

PostPosted: Wed Feb 26, 2014 3:58 pm
by qwaletee
Been wondering... what are the SLOW indicators for. They don't seem to be special errors or warnings, what information does this impart?

Re: [Script] WME Validator 0.7.3 (BETA) / 24.02.2014

PostPosted: Thu Feb 27, 2014 10:03 pm
by qwaletee
irowiki wrote:
qwaletee wrote:Been wondering... what are the SLOW indicators for. They don't seem to be special errors or warnings, what information does this impart?


According to the script, it takes longer to process the stuff marked with SLOW.


So, basically a hint, if activity is slow for you, consider flipping off the SLOW switch. Which you'll probably never remember to turn back on, but hey, half a validator is better than no validator due to a frustrating user experience.

Re: [Script] WME Validator 0.8.2 (BETA) / 09.03.2014

PostPosted: Thu Mar 13, 2014 2:19 pm
by qwaletee
dknight212 wrote:Finding Validator so useful for finding newbie mistakes (and some of us old hands too!). This request is a big one and I'm not sure how you would do it without some exception testing. In London we use this type of construction to work the time based operation of our congestion charge. The idea is to make sure the client display shows it as a normal road as the clever stuff is all overlapped (blame iainhouse for this!). Of course Validator flags it up as overlapping - is it possible to prevent these types of segments being raised as issues?


I don't understand why you need to have the overlap. The regular segments on either side can go right up to the diamond. It would result in far easier map editing.

Re: [Script] WME Validator 0.8.2 (BETA) / 09.03.2014

PostPosted: Thu Mar 13, 2014 2:22 pm
by qwaletee
Minor suggestion.

For the no inward/outward connectivity messages, the message is wide enough to get clipped by the narrow width of the side panel. The part that gets clipped is important -- node A or node B. Why not change the order of the wording to:

SLOW: Node X - no xxward connectivity

I realize you can go to hover and see the whole message, but this rewording obviates the need to do so.

Re: [Script] WME Validator 0.9.0 (BETA) / 20.03.2014

PostPosted: Fri Mar 21, 2014 9:50 pm
by qwaletee
berestovskyy wrote:
pumrum wrote:Street name or alternate street name ends in 'Exd' or any case variant

In the latest 0.9.0 you can use a custom check (Settings->custom):
Template: ${street}
RegExp: / exd$/i

And those names will be immediately highlighted for you.

If we create a dedicated check, I suggest we check at least few incorrect abbreviations, not just Exd.


Like Exn... foud a bunch of those early this month. At least the phonetics were a little better than Exd :)

Re: [Script] WME Validator 0.9.2 (BETA) / 22.03.2014

PostPosted: Sun Mar 23, 2014 2:11 am
by qwaletee
I don't get any beeps

Re: [Script] WME Validator 0.9.2 (BETA) / 22.03.2014

PostPosted: Sun Mar 23, 2014 4:41 pm
by qwaletee
I've also been seeing issues with elevation. Changing a junction, or maybe the elevation of one segment attached to the junction, seems to drop elevation from all the segments in the junction. This appears to be true even if I select the unexpectedly modified segments -- the standard WME segment properties show blank elevation.

If I have a segment that has directional or reverse connection issues and fix it, after I save, it gets highlighted for elevation out of range, but it wasn't highlighted for that before. (I.e., when I select the segment, it only shows the reverse connection problem, it does not also show an elevation note.) This may simply be a symptom of the above -- until I changed the junction to eliminate the reverse connection, perhaps the segment had a properly assigned elevation, so there was no reason to show an elevation note. Once I saved, and the elevation was lost, then there was a reason to display the issue.

So I'm going to vote for there being a problem with WME killing elevation values right now, or a problem with JNF/toolbox doing it.

Re: corrupted elevation

PostPosted: Mon Mar 24, 2014 12:46 am
by qwaletee
dbraughlr wrote:I have not encountered this bug. Enough people have that it deserves its own thread.


Done.