1. Include the city and state in the "Subject:" line of your post
2. Include a Permalink to the segment(s) you wish to unlock or have updated
3. Provide a short explanation of why you need the unlock or update done.
4. Thank the user who solved the request and mark the thread Solved.

Please note that a higher level editor may choose to fix an unlock request themselves so higher value segments will remain protected at their level.

Post Reply
Forum rules
1. Include the city and FULL state name in the "Subject:" line of your post
2. Include a Permalink to the segment(s) you wish to unlock or have updated
3. Provide a short explanation of why you need the unlock or update done.
4. When completed, THANK the user who solved the request and mark the thread SOLVED.

Level 5 Update: California - Los Angeles

Post by PeeVee75
My Level: 1
S 110 Expressway HOT to 105W HOV connection does not seem to ever be offered as a route option by Waze. On the map editor, the below segment shows as 2-way. Could that cause the issue?

https://www.waze.com/en-US/editor?env=u ... s=69243270
PeeVee75
Posts: 7
Has thanked: 1 time

POSTER_ID:17008024

1

Send a message

Post by PeeVee75
Yes. I have Fastrak and I have disabled "Avoid toll roads". Also it typically has me go on the 110S HOT until this segment but does not route me to the 105W express ramp. It works fine on the NB route.
PeeVee75
Posts: 7
Has thanked: 1 time
Send a message

Post by PeeVee75
Not sure I want to do CAV because then it will try to keep me on the HOV on 105W.
PeeVee75
Posts: 7
Has thanked: 1 time
Send a message

Post by PeeVee75
Ok. Cool! I will try it tomorrow AM.

Thanks!
PeeVee75
Posts: 7
Has thanked: 1 time
Send a message

Post by PeeVee75
I tested enabling the CAV decal this morning, and it worked (i.e., I was offered the I110 S HOT to I-105W HOV on-ramp as a route option.) So, it works with FasTrak + CAV but does not work with only FasTrak.
PeeVee75
Posts: 7
Has thanked: 1 time
Send a message

Post by RussPA
From just a quick look the segment has some requirements, like sticker and number of occupants. Do you meet those requirements? Do you have the correct pass setup under Toll & HOV Passes (Cav decal and FasTrak)?
RussPA
Waze Global Champs
Waze Global Champs
Posts: 4042
Answers: 4
Has thanked: 227 times
Been thanked: 876 times
Send a message

Assistant Regional Coordinator - NOR
Global Champ - US
WME Beta Community Coordinator

Post by turbomkt
PeeVee75 wrote:My Level: 1
S 110 Expressway HOT to 105W HOV connection does not seem to ever be offered as a route option by Waze. On the map editor, the below segment shows as 2-way. Could that cause the issue?

https://www.waze.com/en-US/editor?env=u ... s=69243270
Hi, PeeVee75!

Russ already asked the important question about your settings. As for the two way setting - it won't affect routing.

If you're already driving with FasTrak, I suggest trying the CAV Decal. This may be related to an issue I have seen when routing over ramps like this.
turbomkt  
Coordinators
Coordinators
Posts: 3768
Answers: 17
Has thanked: 605 times
Been thanked: 744 times
Send a message
--Mike
RC for Northwest Region (NWR Discord)
ARC for Southwest Region (SWR Discord)

Post by turbomkt
I'm only suggesting it as a test to see if the ramp is suggested while using it. It would give us another data point to tell developers of the issue.
turbomkt  
Coordinators
Coordinators
Posts: 3768
Answers: 17
Has thanked: 605 times
Been thanked: 744 times
Send a message
--Mike
RC for Northwest Region (NWR Discord)
ARC for Southwest Region (SWR Discord)

Post by turbomkt
The CAV Decal has worked more often than not when it's related to HOV or FasTrak. We're taking a close look at whether or not it's a configuration issue we can fix or something on the server side.
turbomkt  
Coordinators
Coordinators
Posts: 3768
Answers: 17
Has thanked: 605 times
Been thanked: 744 times
Send a message
--Mike
RC for Northwest Region (NWR Discord)
ARC for Southwest Region (SWR Discord)