It's worth noting that if that setting is turned on when you are deleting place photos, you will get sent back to the general tab each time you delete a photo and not remain in the photo tab.jm6087 wrote: ↑Fri Oct 21, 2022 9:36 pmYou can turn this behavior off in the settings.rompompom wrote: ↑Fri Oct 21, 2022 3:14 pm I have another request. WME now remembers the tab you were on: when you had the closure tab opened on a segment, and you select a new segment this is opened on the closure segment as well. For existing segments this is quite convenient behaviour. However, when you draw a new segment, this also opens on the closure tab or lane guidance tab. That is inconvenient.
Could it be made that newly drawn segments always open on the general tab?
Pennsylvania SM | New Jersey LAM | District of Columbia & Maine AM
USA Regions: NOR, MAR, NER
A phoenix out of the ashes...together building a more perfect map.
» Waze Etiquette | PA Wiki | Glossary | Places | Lanes | Shields | JSG | Scripts «
https://storage.googleapis.com/wazeoped ... anager.pnghttps://j.mp/2X2TtcVhttps://www.dropbox.com/s/3o2pi4wjn6w1s ... .jpg?raw=1https://www.dropbox.com/scl/fi/yezyes6g ... 0rem&raw=1
After WME v2.115, a place point requires 2 clicks to move it. When creating a new place point, you can add the stop point. But to move the place point, you have to de-select the place point then re-select it.
https://waze.uservoice.com/forums/59223 ... lace-point
Screen capture of behavior
https://waze.uservoice.com/forums/59223 ... lace-point
Screen capture of behavior
Pennsylvania SM | New Jersey LAM | District of Columbia & Maine AM
USA Regions: NOR, MAR, NER
A phoenix out of the ashes...together building a more perfect map.
» Waze Etiquette | PA Wiki | Glossary | Places | Lanes | Shields | JSG | Scripts «
https://storage.googleapis.com/wazeoped ... anager.pnghttps://j.mp/2X2TtcVhttps://www.dropbox.com/s/3o2pi4wjn6w1s ... .jpg?raw=1https://www.dropbox.com/scl/fi/yezyes6g ... 0rem&raw=1
Done - https://waze.uservoice.com/forums/59223 ... ving-a-purnataliiaPi wrote: ↑Wed Oct 19, 2022 6:57 pmHi G_W1Z,G_W1Z wrote: ↑Wed Oct 19, 2022 10:51 amIs there an update on this? It was stated that this was going to be brought internally to the development team.
Also, can this change be addressed?
The team is working on the feature to allow close handled UR/PURs by clicking the "save" button. We will keep you posted.
About the "add" button, I missed that comment. May I ask you to open a related suggestion in the Uservoice section?
Regards,
Nataliia
Pennsylvania SM | New Jersey LAM | District of Columbia & Maine AM
USA Regions: NOR, MAR, NER
A phoenix out of the ashes...together building a more perfect map.
» Waze Etiquette | PA Wiki | Glossary | Places | Lanes | Shields | JSG | Scripts «
https://storage.googleapis.com/wazeoped ... anager.pnghttps://j.mp/2X2TtcVhttps://www.dropbox.com/s/3o2pi4wjn6w1s ... .jpg?raw=1https://www.dropbox.com/scl/fi/yezyes6g ... 0rem&raw=1
The new WME version has impacted scripts/tabs that have multiple sub-tabs. If the tab has multiple sub-tabs, it will open and be blank. If you open another sub-tab then re-open the first sub-tab, it will show the content. But this will repeat every time. Here is a screen capture of the behavior:
https://waze.uservoice.com/forums/59225 ... b-is-blank
https://waze.uservoice.com/forums/59225 ... b-is-blank
Pennsylvania SM | New Jersey LAM | District of Columbia & Maine AM
USA Regions: NOR, MAR, NER
A phoenix out of the ashes...together building a more perfect map.
» Waze Etiquette | PA Wiki | Glossary | Places | Lanes | Shields | JSG | Scripts «
https://storage.googleapis.com/wazeoped ... anager.pnghttps://j.mp/2X2TtcVhttps://www.dropbox.com/s/3o2pi4wjn6w1s ... .jpg?raw=1https://www.dropbox.com/scl/fi/yezyes6g ... 0rem&raw=1
I created a centercode post for this (it is annoying): https://waze.uservoice.com/forums/59225 ... ize-change
Pennsylvania SM | New Jersey LAM | District of Columbia & Maine AM
USA Regions: NOR, MAR, NER
A phoenix out of the ashes...together building a more perfect map.
» Waze Etiquette | PA Wiki | Glossary | Places | Lanes | Shields | JSG | Scripts «
https://storage.googleapis.com/wazeoped ... anager.pnghttps://j.mp/2X2TtcVhttps://www.dropbox.com/s/3o2pi4wjn6w1s ... .jpg?raw=1https://www.dropbox.com/scl/fi/yezyes6g ... 0rem&raw=1
Thank you. What is now the timeline for addressing those bugs?nataliiaPi wrote: ↑Fri Oct 28, 2022 8:25 am Hi G_W1Z,
Thank you for creating suggestions, I upvoted all of them!
Best,
Nataliia
Pennsylvania SM | New Jersey LAM | District of Columbia & Maine AM
USA Regions: NOR, MAR, NER
A phoenix out of the ashes...together building a more perfect map.
» Waze Etiquette | PA Wiki | Glossary | Places | Lanes | Shields | JSG | Scripts «
https://storage.googleapis.com/wazeoped ... anager.pnghttps://j.mp/2X2TtcVhttps://www.dropbox.com/s/3o2pi4wjn6w1s ... .jpg?raw=1https://www.dropbox.com/scl/fi/yezyes6g ... 0rem&raw=1
URs are now loading for me in the feed.nataliiaPi wrote: ↑Mon Nov 07, 2022 2:33 pm Hi Everyone,
The team is working on the issue that URs are not displayed in the feed menu. We will update you when we have news.
Regards,
Nataliia
Pennsylvania SM | New Jersey LAM | District of Columbia & Maine AM
USA Regions: NOR, MAR, NER
A phoenix out of the ashes...together building a more perfect map.
» Waze Etiquette | PA Wiki | Glossary | Places | Lanes | Shields | JSG | Scripts «
https://storage.googleapis.com/wazeoped ... anager.pnghttps://j.mp/2X2TtcVhttps://www.dropbox.com/s/3o2pi4wjn6w1s ... .jpg?raw=1https://www.dropbox.com/scl/fi/yezyes6g ... 0rem&raw=1
Since yesterday evening my feed is empty, and I'm not the only one.
It looks like there are no new issues added.
I don't think it's specific for WME 2.115, but I'm not sure where else to post it.
We have had exactly the same issue before.
It looks like there are no new issues added.
I don't think it's specific for WME 2.115, but I'm not sure where else to post it.
We have had exactly the same issue before.
Country Manager Oman & the Netherlands
WME Stroopwafel Staff
https://storage.googleapis.com/wazeoped ... Badge2.pnghttps://i.ibb.co/ZNbYyt5/RIPIain.png
WME Stroopwafel Staff
https://storage.googleapis.com/wazeoped ... Badge2.pnghttps://i.ibb.co/ZNbYyt5/RIPIain.png
Cannot view visual instructions while in practice mode.
Was this mentioned during beta testing to the script author? It is my understanding that the script author is not very active at the moment. I don't use UR-MP much, but I tested it in beta and saw the same issue.DownPeriscope wrote: ↑Wed Oct 19, 2022 1:07 pmThis sums it up quite adequately. I don't know any proficient editors who don't use at least the UR-MP-script to work URs. This brings up the question of why anyone would want to roll out any new WME version, totally wrecking that functionality. I know you can't check compatibility with every script out there, but can't you at least be aware of the most widely used ones?
The net effect will be detrimental to the map's accuracy, as less UR and MP will be addressed promptly. If you keep this up, editors will take a break from WME or eventually give up altogether. As it is, we're finding it hard enough to keep editors motivated, never mind recruiting new ones (who a.t.m. can't edit at all at Level 1).
Please fix this. Please try harder not to break what you are trying to build.
Thanks,
John
US Global Champ
John
US Global Champ
Re: New Editor version 2.115