[Script] Highlights for Segments & Landmarks - v1.5 Nov 16

The place to get information and ask questions about everything to do with properly and successfully editing the Waze Map.

Use this forum for all general editing questions, and the sub-forums for specific types of Waze Map Editor features.

Moderators: Unholy, bextein

Re: [Script] Highlights for Segments & Landmarks - v1.4.2 Oc

Postby TheDane » Wed Oct 31, 2012 8:24 pm

+1 on the suggestion from skbun about making it possible to see all problems in an area using a colour coding for all segments that have issues. Don't know if beeing able to select which issues you are looking for is over-complicating...

Probably just the different colours for different issues would be fine - with the worst issue type colour being the one showing up when there are multiple issues for a segment.

Regards
TheDane
TheDane
 
Posts: 70
Joined: Mon Jul 26, 2010 9:35 am
Location: Denmark / World server
Has thanked: 0 time
Been thanked: 4 times

Re: [Script] Highlights for Segments & Landmarks - v1.4.2 Oc

Postby jasonh300 » Wed Oct 31, 2012 8:14 pm

youncs wrote:I didn't have any problems installing the last on in chrome, file name ends in .js, just getting the page of code.

Do I have to uninstall the previous one first?


The filename has to end in .user.js

If you download into the same folder, Chrome will make it .user(1).js sometimes and that will prevent it from installing.
jasonh300
 
Posts: 7567
Joined: Fri Oct 28, 2011 4:26 pm
Location: New Orleans, LA, USA
Has thanked: 402 times
Been thanked: 978 times

Re: [Script] Highlights for Segments & Landmarks - v1.4.2 Oc

Postby Timbones » Wed Oct 31, 2012 8:12 pm

Rename it to wme-highlights.user.js and try again. Probably worth removing old versions too.

via mobile
Timbones
Coordinators
Coordinators
 
Posts: 6690
Joined: Wed Feb 09, 2011 10:33 am
Location: York, UK
Has thanked: 978 times
Been thanked: 2617 times

Re: [Script] Highlights for Segments & Landmarks - v1.4.2 Oc

Postby youncs » Wed Oct 31, 2012 7:42 pm

I didn't have any problems installing the last on in chrome, file name ends in .js, just getting the page of code.

Do I have to uninstall the previous one first?
youncs
 
Posts: 139
Joined: Tue Sep 25, 2012 8:01 pm
Location: Jacksonville, FL
Has thanked: 0 time
Been thanked: 0 time

Re: [Script] Highlights for Segments & Landmarks - v1.4.2 Oc

Postby floppyrod84 » Wed Oct 31, 2012 7:13 am

no need to subscribe, I posted in this thread so it shows on Tapatalk, but it saves going through all the comments if I can see the date. Easier to remember than a version number, especially when away from home.
BTW, thanks Tim :)
floppyrod84
 
Posts: 2569
Joined: Wed Jan 19, 2011 3:17 pm
Location: Sheerness, Kent, UK
Has thanked: 46 times
Been thanked: 45 times

Re: [Script] Highlight Segments & Landmarks - v1.4.2 Oct 29

Postby foxitrot » Wed Oct 31, 2012 8:05 am

When shortened like this, the title could accomodate the date as well.
foxitrot
Waze Global Champs
Waze Global Champs
 
Posts: 7082
Joined: Thu Jul 14, 2011 10:22 pm
Location: Slovakia
Has thanked: 2384 times
Been thanked: 1086 times

Idea for dropdown display?

Postby skbun » Mon Nov 05, 2012 8:41 am

Preface: This is only a suggestion. It feels like it would maximize the useful information here and helps single out flaws, but it may be a nightmare of loops. Just want to put it out there as a possibility.

* List all cities, including 'No city' if applicable. As now, if state and country are identical, they do not need to be printed.
* If the 'state' field is undefined (blank) for all polled segments, do not print the state field at all. If there are 2+ countries and the state field is defined in at least one, print all three: city, state, country.
* If the states are different and the country is the same for all polled, the country does not need to be printed.
* (On the fence about this, but could help debug issues?) At the end of any of these cases, append the CityID unless it's for 'No City'.

Examples:
(Assume State for all is Washington, but there is 1+ Canada country segment).
Algoma, Washington, United States (20051)
Federal Way, Washington, United States (45994)
Black Diamond, Washington, Canada (44221)
NO CITY, Washington, United States

(Assume States mixed between Washington and Oregon. Country same for all.)
Algoma, Washington (20051)
Federal Way, Washington (45994)
Federal Way, Oregon (66554)
NO CITY, Washington

(No state field in ANY segment, null or whatever - probably a typical Intl server case)
Algoma, United States (20051)
Federal Way, United States (45994)
Black Diamond, Canada (92344)
NO CITY, United States

(2+ states, where 'NONE' is counted as one, different countries visible)
Algoma, NO STATE, United States (20051)
Federal Way, Washington, United States (45994)
Black Diamond, Washington, Canada (92344)
NO CITY, Washington, United States

(2+ states, where 'NONE' is counted as one, all same country)
Algoma, Washington (20051)
Federal Way, NO STATE (66446)
Black Diamond, Washington (22445)
NO CITY, Washington
skbun
 
Posts: 425
Joined: Sun May 06, 2012 12:27 am
Location: Seattle/Tacoma WA
Has thanked: 27 times
Been thanked: 48 times

[Script] Highlights for Segments & Landmarks - v1.5 Nov 16

Postby Timbones » Thu Aug 30, 2012 6:18 pm

Here's my latest script, which adds color highlighting to segments and landmarks according to their status and type. The highlighting of segments is likely to be most useful, for it shows locked and un-named roads.

> WME Color Highlights script at userscripts.org - updated Nov 16

Chrome users will need to download this to their PC, and then drag '141050.user.js' into the Extensions tab.
Firefox users will need the Greasemonkey addon.


Many thanks to Dave2084, AlanOfTheBerg and bgodette, and many other beta testers who gave feedback and added features.

:ugeek:
Attachments
wme-highlights.png
(88.55 KiB) Downloaded 10425 times
Timbones
Coordinators
Coordinators
 
Posts: 6690
Joined: Wed Feb 09, 2011 10:33 am
Location: York, UK
Has thanked: 978 times
Been thanked: 2617 times

[Script] Highlights for Segments & Landmarks - v1.5 Nov 16

Postby pjlasl » Wed Jan 30, 2013 3:11 pm

@iaonhouse I like your suggestion. I did some digging and figured out how to change the locked color :).


Sent from my iPhone 4 using Tapatalk - Weatherford TX Area Manager.
pjlasl
Area Manager
Area Manager
 
Posts: 378
Joined: Tue Nov 13, 2012 2:41 pm
Location: Weatherford, TX
Has thanked: 31 times
Been thanked: 110 times

[Script] Highlights for Segments & Landmarks - v1.5 Nov 16

Postby pjlasl » Wed Jan 30, 2013 12:52 am

Could we have the ability to change highlight colors maybe? Locks are very hard to see on major Hwys since the are red...


Sent from my iPhone 4 using Tapatalk - Weatherford TX Area Manager.
pjlasl
Area Manager
Area Manager
 
Posts: 378
Joined: Tue Nov 13, 2012 2:41 pm
Location: Weatherford, TX
Has thanked: 31 times
Been thanked: 110 times

PreviousNext

Return to Waze Map Editor

Who is online

Users browsing this forum: cetek