Turn signal required notification and reset notification
Would a notification be able to be added for roads that require turn signal usage even when continuing on the primary road? The link below is to an intersection with signage requiring usage of turn signal and also resetting the turn signal once leaving the intersection. While most local people that are familiar with the intersection would know to use their turn signal, people navigating it with the use of GPS because they do not know the area would not know to use their turn signal unless they noticed the sign but usually they're paying more attention to their GPS than signage. Maybe the notification could be a flashing signal on the screen until the driver leaves the intersection and is then notified to reset their turn signal on the screen at which point their signal would stop linking as if it mimic their blinker on their car. Maybe the notification would have a preset countdown timer of 10 seconds or so once the GPS signal leaves the intersection so user does not have to engage to GPS to disable the notification.
Maybe a rule can be applied to either a geo-fence or all sections of road associated with it because generally if one side of the intersection has to sign requiring turn signal usage every other direction for that same intersection requires turn signal usage
https://www.waze.com/editor/?zoom=4&lat ... s=26245453
Maybe a rule can be applied to either a geo-fence or all sections of road associated with it because generally if one side of the intersection has to sign requiring turn signal usage every other direction for that same intersection requires turn signal usage
https://www.waze.com/editor/?zoom=4&lat ... s=26245453
Re: Turn signal required notification and reset notification