Seem to have found a problem: WME Map Nav History 0.2.9 seems to damage UROverview Plus (URO+) 3.129 in that if MNH is enabled URO+ stops displaying 'stacked' URs and the 'pop up box' showing the current UR's data fails to pop up on mouse over.
Maybe he doesn't currently have any states defined. I can't 'currently find a way to change from my current list of states. I'm almost certain that there used to be an easy to find place to change and add to my list.
DISREGARD--I was mistooken.
I was thinking of the contry/state filter/scan list in UR-MP tracking. Sorry.
DISREGARD--I was mistooken.
I was thinking of the contry/state filter/scan list in UR-MP tracking. Sorry.
Last edited by bz2012 on Mon Aug 27, 2018 7:25 pm, edited 2 times in total.
Area Manager, Louisiana https://media.discordapp.net/attachment ... nknown.png
Feed filtering seems to have broken recently.
I have been happily using "Hide entries less than 9689 days old" to get rid of all that feed junk I don't want to see, but a few minutes ago, WME started ignoring that option and it also ignores
"Hide entries more than 1 days old" when I try that one. Don't know about the other filters.
I have been happily using "Hide entries less than 9689 days old" to get rid of all that feed junk I don't want to see, but a few minutes ago, WME started ignoring that option and it also ignores
"Hide entries more than 1 days old" when I try that one. Don't know about the other filters.
Area Manager, Louisiana https://media.discordapp.net/attachment ... nknown.png
Tracked down the extension that seems to be breaking the Feed Filtering:
WME Fix UI 2.24
It breaks when
"Invert behaviour of above filters"
is checked.
WME Fix UI 2.24
It breaks when
"Invert behaviour of above filters"
is checked.
Area Manager, Louisiana https://media.discordapp.net/attachment ... nknown.png
Inverting the "Hide entries less than 9689 days old" could explain it as it would prevent the hiding of any entry that was less than 9689, so it would show all entries.
I would call that an undesirable thing. It seems to have changed recently because things worked fine until this morning.
How about splitting those above and those below and providing TWO check boxes, one to invert those above and a separate one for inverting those below?
That would make a lot more sense to me than tying them all together.
Even better might be an 'invert' flag for each option. Not sure if that would be too knotty or not.
I would call that an undesirable thing. It seems to have changed recently because things worked fine until this morning.
How about splitting those above and those below and providing TWO check boxes, one to invert those above and a separate one for inverting those below?
That would make a lot more sense to me than tying them all together.
Even better might be an 'invert' flag for each option. Not sure if that would be too knotty or not.
Area Manager, Louisiana https://media.discordapp.net/attachment ... nknown.png
Just set your feeds filter to hide entries less than 9000 days old and you don't have to mess with feeds any more.
Area Manager, Louisiana https://media.discordapp.net/attachment ... nknown.png
Two problems I am seeing with URO+
1) intermittent failure to unstack multiple URs. Sometimes no unstacking occurs until after I 'refresh' WME by clicking on the PL icon without having any UR selected, and even then it is often difficult to select the UR I want. The unstacking used to be nice and easy and smooth, now it is clunky and often broken.
2) some characters will not type from my normal keyboard (today it is any of the 3 digits '1', '2' or '3'.
The shift character for those digits is also 'suppressed' when ever I try to type into the boxes in the UR to send text to reporter. For those digits, if I activate the 'numberpad' build into my laptop keyboard' by doing a Fn F4 and then hold the Fn key and press the 'J', 'K', or 'L' keys I can insert the suppressed digit I want to type. But that is a bit of a hassle. Don't understand why it is happening, and that still leaves me with no way to type '!', '@', or '#' other than going to a text editor, and typing the text I want to type into some text document and then using 'copy/paste' to finally get the text I want to send to reporter into the UR.
1) intermittent failure to unstack multiple URs. Sometimes no unstacking occurs until after I 'refresh' WME by clicking on the PL icon without having any UR selected, and even then it is often difficult to select the UR I want. The unstacking used to be nice and easy and smooth, now it is clunky and often broken.
2) some characters will not type from my normal keyboard (today it is any of the 3 digits '1', '2' or '3'.
The shift character for those digits is also 'suppressed' when ever I try to type into the boxes in the UR to send text to reporter. For those digits, if I activate the 'numberpad' build into my laptop keyboard' by doing a Fn F4 and then hold the Fn key and press the 'J', 'K', or 'L' keys I can insert the suppressed digit I want to type. But that is a bit of a hassle. Don't understand why it is happening, and that still leaves me with no way to type '!', '@', or '#' other than going to a text editor, and typing the text I want to type into some text document and then using 'copy/paste' to finally get the text I want to send to reporter into the UR.
Area Manager, Louisiana https://media.discordapp.net/attachment ... nknown.png
Hello.
I discovered recently this script and its wonderful button to remove all closures from selected segments (oddly, this is present only in the script for Tampermonkey version, not in the Chrome Extension version).
Although this "remove all closures" button is great, it would be even greater if we had to click "OK to remove" once instead of having to click n times for n closures.
I'm still exploring the other features, so I may have more feedback later.
Thanks for this script.
I discovered recently this script and its wonderful button to remove all closures from selected segments (oddly, this is present only in the script for Tampermonkey version, not in the Chrome Extension version).
Although this "remove all closures" button is great, it would be even greater if we had to click "OK to remove" once instead of having to click n times for n closures.
I'm still exploring the other features, so I may have more feedback later.
Thanks for this script.
Caart - Éditeur bénévole ④
Team Closures : France
Region Manager : Hauts-de-France
State Manager : Val-de-Marne
Area Manager : Nord de l'Essonne et Sud des Hauts-de-Seine
Beta Tester : App
Rejoindre la communauté sur Discord: https://discord.gg/Vbm7apzuFd
Team Closures : France
Region Manager : Hauts-de-France
State Manager : Val-de-Marne
Area Manager : Nord de l'Essonne et Sud des Hauts-de-Seine
Beta Tester : App
Rejoindre la communauté sur Discord: https://discord.gg/Vbm7apzuFd
I fully agree, but it should be removed from first post, or a warning should be added about the Chrome extensioniainhouse wrote:I don't believe the Chrome extension is being updated any more. It's a lot easier to update scripts on GreasyFork.Caart wrote:(oddly, this is present only in the script for Tampermonkey version, not in the Chrome Extension version).
Caart - Éditeur bénévole ④
Team Closures : France
Region Manager : Hauts-de-France
State Manager : Val-de-Marne
Area Manager : Nord de l'Essonne et Sud des Hauts-de-Seine
Beta Tester : App
Rejoindre la communauté sur Discord: https://discord.gg/Vbm7apzuFd
Team Closures : France
Region Manager : Hauts-de-France
State Manager : Val-de-Marne
Area Manager : Nord de l'Essonne et Sud des Hauts-de-Seine
Beta Tester : App
Rejoindre la communauté sur Discord: https://discord.gg/Vbm7apzuFd
Not sure if it is a bug or feature, but:
When going to the "Places" tab, and under "Filter PURs by category/status:" checking the "Ones I can't edit" option, those places (the ones I can't edit) disappear from the map, no matter if URO+ is checked as "Enabled" or not.
When going to the "Places" tab, and under "Filter PURs by category/status:" checking the "Ones I can't edit" option, those places (the ones I can't edit) disappear from the map, no matter if URO+ is checked as "Enabled" or not.
----------------------
iPhone X, iOS 13.1, latest Waze beta
----------------------
https://s.waze.tools/c5.png
iPhone X, iOS 13.1, latest Waze beta
----------------------
https://s.waze.tools/c5.png
Re: [Script] UROverview Plus v3.129 (20180302)