[Script] Live Map UR Layer v2.24 (20160202)

Discussion for the unofficial, community-developed addons, extensions and scripts built for the Waze Map Editor.

The official index of these tools is the Community Plugins, Extensions and Tools wiki page.

Moderators: Unholy, bextein

Forum rules
Discussion for the unofficial, community-developed addons, extensions and scripts built for the Waze Map Editor.

DO NOT START a new thread unless it is about a new idea. Keep discussion of existing tools within the main thread for that tool.

The official index of these tools is the Community Plugins, Extensions and Tools wiki page.

Re: [Script] Live Map UR Layer v2.15 (20141122)

Postby Szata76 » Sun Nov 23, 2014 12:23 pm

Twister-UK wrote:Do you mean the area gets filled in block by block and then immediately clears, or that it fades out and then clears after a few minutes? The latter is by design, to prevent the display of data that may no longer be valid, and to keep the memory usage of the script under control.

I think this is the latter. I'm working on two browser tabs parallelly, a WME and a LM. I leave the LM tab to LMUR read the reports while I work with WME. So the automatic clearing is not so good. I'd like to rest the reports on screen while I'm stepping report by report in WME.
By the way the block by block reading is a very good idea. With the previous method the tab lags tens of second. Just I've another claim. The LMUR is not scanning the whole LM area. The vertical edges remain if the area is big.
LMUR_2.15_141113.JPG
(166.82 KiB) Downloaded 539 times
Szata76
Waze Global Champs
Waze Global Champs
 
Posts: 3320
Joined: Fri Jun 10, 2011 5:07 pm
Location: EU, Hungary, Budapest
Has thanked: 311 times
Been thanked: 489 times

Re: Proof of Concept script: UR layer in Live Map

Postby Timbones » Wed Oct 17, 2012 12:05 pm

Nice work, Twister - it works quite nicely. :)
Timbones
Coordinators
Coordinators
 
Posts: 11210
Joined: Wed Feb 09, 2011 10:33 am
Location: York, UK
Has thanked: 991 times
Been thanked: 2712 times

Re: Proof of Concept script: UR layer in Live Map

Postby Timbones » Tue Nov 06, 2012 2:11 pm

leocylau wrote:arh...I can't get it work. Can't see the check box at all :?

Requires a secure connection > https://world.waze.com/livemap/
Timbones
Coordinators
Coordinators
 
Posts: 11210
Joined: Wed Feb 09, 2011 10:33 am
Location: York, UK
Has thanked: 991 times
Been thanked: 2712 times

Re: [Script] Live Map UR Layer v1.0 (20130226)

Postby Timbones » Wed Feb 27, 2013 10:23 am

Or just click on the "Update map" link at the top of the screen.

The Livemap Navigation addon fixes this link to be a proper edit permalink for the current location.
Timbones
Coordinators
Coordinators
 
Posts: 11210
Joined: Wed Feb 09, 2011 10:33 am
Location: York, UK
Has thanked: 991 times
Been thanked: 2712 times

Re: [Script] Live Map UR Layer v1.8 (20130822)

Postby Timbones » Tue Oct 08, 2013 9:46 am

Twister - how about a table of URs instead?

You already know how to get all the URs within the editable area, so listing them in a table would be nice and easy, no? Maybe as a popup tab in the editor and/or the dashboard, with appropriate icons (UR, MP, conversation, etc), colours, dates and a link to the map position. Just like we had in 'the good old days'.

For example: (ordered by date, popup description on hover)
:!: Turn not allowed - 1 comment - Sept 30
:!: Missing road - 3 comments - Sept 29
:?: User didn't follow route - no comments - Sept 29

Let me know if you want a hand with the coding or testing...
Timbones
Coordinators
Coordinators
 
Posts: 11210
Joined: Wed Feb 09, 2011 10:33 am
Location: York, UK
Has thanked: 991 times
Been thanked: 2712 times

Re: [Script] Live Map UR Layer v2.3 (20131020)

Postby Timbones » Sun Oct 20, 2013 8:47 pm

Timbones wrote:Twister - how about a table of URs instead?

What did you think about this idea? A different script perhaps? I know you're short of time, but it would be nice to have. (I'd make it myself if I could find the time) :)

via mobile
Timbones
Coordinators
Coordinators
 
Posts: 11210
Joined: Wed Feb 09, 2011 10:33 am
Location: York, UK
Has thanked: 991 times
Been thanked: 2712 times

Re: [Script] Live Map UR Layer v2.15 (20141122)

Postby Timbones » Sun Nov 23, 2014 10:16 pm

I think "Petrol Station Checker" option can be removed - that project was finished a long time ago. Iain would have swept up any left over URs by now. :mrgreen:
Timbones
Coordinators
Coordinators
 
Posts: 11210
Joined: Wed Feb 09, 2011 10:33 am
Location: York, UK
Has thanked: 991 times
Been thanked: 2712 times

Re: [Script] Live Map UR Layer v1.0 (20130226)

Postby twist3r » Sat Mar 16, 2013 8:15 am

Is this script supposed to work on Chrome ? Because I can't see anything new in Livemap even if there are UR's that I have the right to edit.
twist3r
Country Manager
Country Manager
 
Posts: 1462
Joined: Sun Jul 04, 2010 1:22 pm
Location: Timișoara, România
Has thanked: 81 times
Been thanked: 127 times

Re: [Script] Live Map UR Layer v1.0 (20130226)

Postby twist3r » Sat Mar 16, 2013 10:37 am

I was expecting that but no bar was visible. However I missed the part were it was written that you have to be on https version of livemap, not the http. I always used the default one that is http and never thought using a more secure one.

Now with https:// the bar is visible and the script is working just fine. My bad
twist3r
Country Manager
Country Manager
 
Posts: 1462
Joined: Sun Jul 04, 2010 1:22 pm
Location: Timișoara, România
Has thanked: 81 times
Been thanked: 127 times

[Script] Live Map UR Layer v2.24 (20160202)

Postby Twister-UK » Wed Oct 17, 2012 6:15 am

This is a first stab at hacking together a UR/map problems layer for the Waze livemap view. This version is intended for users to test the core functionality required in such a layer - namely the ability for a third-party script to retrieve UR/problem data from the Waze server when no such data is already present on the page, and to then display it somehow over the existing map view.

After installation, you should see a new checkbox at the bottom of the Live Map window, titled "Update Requests". Tick this box to activate the script. Once active, the script monitors for any movement/zooming of the live map view, and requests the current UR/problem data from the Waze server for the area being viewed. The locations of any received URs are then plotted on the map as a small red/blue box (map problems are not plotted at present).

The Waze servers will not return any data for an area wider or taller than 1 degree of lat/lon, so if the livemap is zoomed out too far the script will only retrieve data for the central area. The area in which data is being requested should show up as a translucent yellow box.

Note that the Waze server will only return data if there is a logged-in user, and the data returned is filtered according to the editable areas assigned to that user - this script cannot display ALL the URs/problems in a given area, ONLY those that the logged-in user would be able to edit.


Firefox+Greasemonkey version: https://greasyfork.org/scripts/1948-livemap-ur-overlay
Chrome Web Store version: https://chrome.google.com/webstore/deta ... niefljookp
Last edited by Twister-UK on Tue Feb 02, 2016 11:45 pm, edited 44 times in total.
Twister-UK
Beta tester
Beta tester
 
Posts: 5806
Joined: Sat Jan 07, 2012 12:00 am
Location: NW London
Has thanked: 438 times
Been thanked: 2593 times

PreviousNext

Return to Addons, Extensions, and Scripts

Who is online

Users browsing this forum: MapOMatic, n4dog