Hi Twister,
Is there any way to distinguish the URs reported from private car and taxi.
Cheers,
Leo
Is there any way to distinguish the URs reported from private car and taxi.
Cheers,
Leo
This one should be reported in Taxi mode except the reporter has made mistakedTwister-UK wrote:Do you have any examples of URs that were *definitely* submitted by someone running in taxi mode? If not I'll try dropping a few on my way home tonight.leocylau wrote:Hi Twister,
Is there any way to distinguish the URs reported from private car and taxi.
Cheers,
Leo
UK Wiki • UK Forum
'For I am not seeking my own good but the good of many, so that they may be saved.' 1 Cor. 10:33b
GC•Newcastle upon Tyne AM•HK CM•Localisation Coordinator
'For I am not seeking my own good but the good of many, so that they may be saved.' 1 Cor. 10:33b
GC•Newcastle upon Tyne AM•HK CM•Localisation Coordinator
Hi,
The scripts does not recognize an in-app closure correct.
Here I have a closure just made in WME, but URO+ recognize this as an in-app closure.
As you can see in Screenshot 1 this is no app-closure because the closure mark is grey and not red, The closure isn't edited either as I can see in the history:
Can you please take a look at this?
Thnks
The scripts does not recognize an in-app closure correct.
Here I have a closure just made in WME, but URO+ recognize this as an in-app closure.
As you can see in Screenshot 1 this is no app-closure because the closure mark is grey and not red, The closure isn't edited either as I can see in the history:
In the second screenshot you can see that I am not allowed to edit the closure. I think the problem is that the closure is made in WME by a editor with a lower rank than the segment itself is locked. The segment is locked at L2 and the editor is a L1. That editor is allowed to add closures because we gave him a closure area.Wed Jul 31 2019, 11:15 by VRFR-KHamstra(1)
Multiple changes
Road closure: added
ID: 3998228.40244427.20443442
Reason: Reconstructie
MTE: not provided
From: 2019-08-19 07:00
To: 2019-12-19 16:00
Direction: A-B
Ignore traffic: false
Road closure: added
ID: 3998228.40244427.20443342
Reason: Reconstructie
MTE: not provided
From: 2019-08-19 07:00
To: 2019-12-19 16:00
Direction: B-A
Ignore traffic: false
Can you please take a look at this?
Thnks
https://tinyurl.com/y73v37xehttps://s.waze.tools/gc.pnghttps://s.waze.tools/c6s.pnghttps://s.waze.tools/beta.pngimages/ranks/BetaTester_Badge.png
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Thanks for looking out. Wasn't aware of that issue.Twister-UK wrote:Having now looked at the RTC data, the missing ID bug does seem to be the reason for this one being flagged as an in-app RTC as well.
As I understood well this WME bug is already fixed in the beta WME?
So let that version come out to production.
https://tinyurl.com/y73v37xehttps://s.waze.tools/gc.pnghttps://s.waze.tools/c6s.pnghttps://s.waze.tools/beta.pngimages/ranks/BetaTester_Badge.png
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
I still have this BUG in the latest beta WME.Twister-UK wrote:This is related to a bug in WME which is causing it to forget the data associated with segments after certain operations - if you've got segment popups enabled and they start showing "non-existent streetID" instead of the actual segment name, or if you click on a segment and it shows "No address" in the left-hand side panel instead of the actual name, then it indicates WME has lost the data.
At this point, any closures added to segments will be generated with blank location data - WME knows which *segment* the closures are being added to, but not which *streets* those segments relate to. Unfortunately, blank location data is also a trait of closures generated from the Waze app and, until this WME bug surfaced, was the only way to differentiate an in-app closure from a WME one...
Waze staff have now informed us that this bug has been fixed, though at present there's no indication when this fix will turn up in the production version of WME, so until this happens please be patient and pay attention to any unexpected loss of street names.
Is there a separate BUG report about this issue?
https://tinyurl.com/y73v37xehttps://s.waze.tools/gc.pnghttps://s.waze.tools/c6s.pnghttps://s.waze.tools/beta.pngimages/ranks/BetaTester_Badge.png
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
There is a bug that new URs are not going into the feed.
Staff is aware of this issue.
Sent from my ONEPLUS A5000 using Tapatalk
Staff is aware of this issue.
Sent from my ONEPLUS A5000 using Tapatalk
https://tinyurl.com/y73v37xehttps://s.waze.tools/gc.pnghttps://s.waze.tools/c6s.pnghttps://s.waze.tools/beta.pngimages/ranks/BetaTester_Badge.png
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
I am having troubles with the advanced history.
Changes in the advances turn instructions are not shown in the history panel.
While using WME without scripts I do see the changes in the advanced turns.
I am having more scripts open. Maybe some other scripts are interfering?
See screenshot.
Left is in incognito without scripts and right is with all my scripts on.
Changes in the advances turn instructions are not shown in the history panel.
While using WME without scripts I do see the changes in the advanced turns.
I am having more scripts open. Maybe some other scripts are interfering?
See screenshot.
Left is in incognito without scripts and right is with all my scripts on.
https://tinyurl.com/y73v37xehttps://s.waze.tools/gc.pnghttps://s.waze.tools/c6s.pnghttps://s.waze.tools/beta.pngimages/ranks/BetaTester_Badge.png
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
In latest WME production URO+ is giving me a grey left menu.
https://tinyurl.com/y73v37xehttps://s.waze.tools/gc.pnghttps://s.waze.tools/c6s.pnghttps://s.waze.tools/beta.pngimages/ranks/BetaTester_Badge.png
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Isn't working for me neither.taco909 wrote: ↑Wed Aug 23, 2023 4:39 pmThat's not working for me.Webs101 wrote: ↑Tue Aug 22, 2023 2:49 pmThis was the case for me at first. Now it's working for me without crashing the sidebar (so far).
1) I disabled URO+ in Tampermonkey.
2) I reloaded WME.
3) I re-enabled URO+ in Tampermonkey.
4) I clicked the "Enable" box in URO+ in the WME Scripts panel.
It's been working fine* for me since.
* "Fine" as in only periodic sidebar crashes rather than 100% of the time.
I can disable it in TM and reload WME.
When reenabling URO+ in TM, I have to reload WME again (URO does not show in the scripts box), and after the reload, the sidebar is solid white.
Disable in TM and reload WME, everything is back to the current "normal"
When enabling URO+ I immediately get the grey left menu panel
https://tinyurl.com/y73v37xehttps://s.waze.tools/gc.pnghttps://s.waze.tools/c6s.pnghttps://s.waze.tools/beta.pngimages/ranks/BetaTester_Badge.png
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Thank you.
Latest update fixes the grey left menu.
Thanks
Latest update fixes the grey left menu.
Thanks
https://tinyurl.com/y73v37xehttps://s.waze.tools/gc.pnghttps://s.waze.tools/c6s.pnghttps://s.waze.tools/beta.pngimages/ranks/BetaTester_Badge.png
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Global Champ
Country Manager Benelux
Regio Manager: Gelderland
Benelux wiki - Waze Nederland Slack invite
Re: [Script] UROverview Plus v3.73 (20160215)